## Description
Consolidates Playwright running under cohesive Task namespaces, isolates
Playwright state from the developer's local working tree, and swaps CI's
frontend webserver from `vite` dev to `vite preview` against a pre-built
`dist/`.
### `e2e:*` namespace
Renames `.taskfiles/testing.yml` to `.taskfiles/e2e.yml` and
consolidates everything Playwright-related under one `e2e:` namespace:
- `e2e:stubbed` / `e2e:live` / `e2e:enterprise` / `e2e:cross-browser`:
project-specific runners
- `e2e:check` (no-Docker subset) and `e2e:check:all` (full)
- `e2e:oauth:up` / `:down`, `e2e:saml:up` / `:down`: symmetric lifecycle
for the keycloak compose stacks
- `e2e:install`: Playwright browser install
- `docker:test`: full Docker integration suite
The redundant `frontend:test:e2e:*` project shortcuts are removed. CI
workflows (`e2e-stubbed.yml`, `e2e-live.yml`, `build-enterprise.yml`,
`nightly.yml`) are updated to call the new task names.
### Isolated Playwright state
New `STIRLING_BASE_PATH` (and `-Dstirling.base-path=`) override in
`InstallationPathConfig` redirects the entire state tree (configs,
backups, customFiles, pipeline, logs) at startup. `task e2e:live` points
it at `.test-state/playwright/` (purged on every invocation) so the
suite never touches the developer's local DB, settings.yml or backups.
`task e2e:live` auto-spawns gradle, waits for `/api/v1/info/status` to
come up, runs Playwright, then tears down the whole backend process
tree.
### CI runs Playwright against `vite preview`
Builds the frontend up-front with `VITE_BUILD_FOR_PREVIEW=1` (forces
absolute base so deep SPA routes resolve `/assets/...`) and the
playwright `webServer` now uses `vite preview --port 5173 --strictPort`
in CI. Avoids the per-page on-demand transform cost that was blowing the
30s navigation timeout under `--workers=3` on
`all-tool-pages-load.spec.ts`. Local dev keeps `vite` dev for HMR.
### OAuth/SAML compose helpers
`start-oauth-test.sh` and `start-saml-test.sh` gain a `--license-key
<KEY>` (`-k`) flag so CI and scripted runs can skip the interactive
license prompt. `start-oauth-test.sh` also moves from `for arg in "$@"`
to a `while`-with-`shift` arg loop to support multi-arg flags
consistently with the SAML script.
### Backend gradlew unification
Drops the per-platform `cmd /c gradlew.bat` branches from `backend.yml`
and routes every gradle invocation through `bash gradlew`. Works
uniformly on Linux/macOS and Windows-with-Git-Bash.
### Compare.tsx flake fix (re-land of
[#6316](https://github.com/Stirling-Tools/Stirling-PDF/pull/6316))
Piggybacks Anthony's never-merged fix from #6316. Without it,
`e2e:stubbed` continues to flake under `--workers=3` on
`compare.spec.ts`'s second-upload case via a React "Maximum update depth
exceeded" infinite loop in the Compare auto-fill effect. CI traces from
recent failed runs match exactly; 10 local runs of `compare.spec.ts`
with `CI=1 --workers=3` pass cleanly with the fix applied.
---------
Co-authored-by: James Brunton <[email protected]>
# Description of Changes
Vite currently warns that when it's bundling our code that the chunk
size is way too high because most of the imports are static so it can't
split them into smaller chunks. This PR changes a few key areas to use
lazy imports to try and make the chunks as small as possible with
minimal code changes.
Vite's warnings kick in at minified chunks being >500kB, and we've got a
little way to go still to reach that, but we can keep chipping away at
this and I'd rather get the biggest wins done now. I've also included
Lighthouse scores because there's been discussion about improving ours
recently. It's not the aim of this PR to improve it, but it's nice that
it makes it a little better.
## Current main chunks
Build split into 12 chunks. Largest chunk in build is:
```
[frontend:build] dist/assets/index-B6JiWDxZ.js 5,175.51 kB │ gzip: 1,495.85 kB
```
<img width="1442" height="775" alt="image"
src="https://github.com/user-attachments/assets/b0e8a3fa-4ef3-4ccd-8c1d-bfed2d99bd27"
/>
Lighthouse score:
<img width="423" height="146" alt="before"
src="https://github.com/user-attachments/assets/c62056e8-2e77-49a6-a1ae-f08ec8021fb3"
/>
## This PR's chunks
Build split into 176 chunks. Largest chunk in build is:
```
[frontend:build] dist/assets/index-qCgeCY4B.js 2,878.54 kB │ gzip: 861.03 kB
```
<img width="1447" height="776" alt="image"
src="https://github.com/user-attachments/assets/8d0c3cf0-cc25-41c3-b114-4940d3e99349"
/>
Lighthouse score:
<img width="402" height="145" alt="after"
src="https://github.com/user-attachments/assets/99a26eb3-bd15-4b92-bf22-82b58b458f52"
/>
---------
Co-authored-by: EthanHealy01 <[email protected]>
# Description of Changes
When I added Prettier formatting in #6052, my aim was to use just the
default settings in Prettier. Turns out, Prettier looks _really hard_
for any config files if it's not explicitly given one, which means that
if a developer has some sort of Prettier config file lying around on
their system, Prettier might find it and use it. Also, Prettier changes
its defaults based on stuff in `.editorconfig` without any good way of
disabling that behaviour explicitly in its config file.
To solve both of these issues, I've introduced a `.prettierrc` file
which sets Prettier's defaults explicitly, and then reformatted all our
code _again_ in Prettier's actual default settings. This should achieve
the aim of #6052 and remove the possibility for it breaking on different
dev computers.
# Description of Changes
Changes the strategy for autoformatting to reject PRs if they are not
formatted correctly instead of allowing them to merge and then spawning
a new PR to fix the formatting. The old strategy just caused more work
for us because we'd have to manually approve the followup PR and get it
merged, which required 2 reviewers so in practice it rarely got done and
just meant everyone's PRs ended up containing reformatting for unrelated
files, which makes code review unnecessarily difficult. If the PR's code
is not formatted correctly after this PR, a comment will be added
automatically to tell the author how to run the formatter script to fix
their code so it can go in.
This also enables autoformatting for the frontend code, using Prettier.
I've enabled it for pretty much everything in the frontend folder, other
than 3rd party files and files it doesn't make sense for. I also
excluded Markdown because it sounds likely to be more annoying to have
to autoformat the Markdown in the frontend folder but nowhere else. Open
to changing this though if people disagree.
> [!note]
>
> Advice to reviewers: The first commit contains all of the actual logic
I've introduced (CI changes, Prettier config, etc.)
> The second commit is just the reformatting of the entire frontend
folder.
> The first commit needs proper review, the second one just give it a
spot-check that it's doing what you'd expect.
# Description of Changes
Add prototypes folder to test new functionality in. This build of the
app is spawnable with `npm run dev:prototypes`.
Currently just contains a very developer-y chat interface to help us
develop & explore the AI backend before we make the frontend for it for
real.
# Description of Changes
Previously, `VITE_*` environment variables were scattered across the
codebase with hardcoded fallback values inline (e.g.
`import.meta.env.VITE_STRIPE_KEY || 'pk_live_...'`). This made it
unclear which variables
were required, what they were for, and caused real keys to be silently
used in builds where they hadn't been explicitly configured.
## What's changed
I've added `frontend/.env.example` and `frontend/.env.desktop.example`,
which declare every `VITE_*` variable the app uses, with comments
explaining each one and sensible defaults where applicable. These
are the source of truth for what's required.
I've added a setup script which runs before `npm run dev`, `build`,
`tauri-dev`, and all `tauri-build*` commands. It:
- Creates your local `.env` / `.env.desktop` from the example files on
first run, so you don't need to do anything manually
- Errors if you're missing keys that the example defines (e.g. after
pulling changes that added a new variable). These can either be
manually-set env vars, or in your `.env` file (env vars take precedence
over `.env` file vars when running)
- Warns if you have `VITE_*` variables set in your environment that
aren't listed in any example file
I've removed all `|| 'hardcoded-value'` defaults from source files
because they are not necessary in this system, as all variables must be
explicitly set (they can be set to `VITE_ENV_VAR=`, just as long as the
variable actually exists). I think this system will make it really
obvious exactly what you need to set and what's actually running in the
code.
I've added a test that checks that every `import.meta.env.VITE_*`
reference found in source is present in at least one example file, so
new variables can't be added without being documented.
## For contributors
New contributors shouldn't need to do anything - `npm run dev` will
create your `.env` automatically.
If you already have a `.env` file in the `frontend/` folder, you may
well need to update it to make the system happy. Here's an example
output from running `npm run dev` with an old `.env` file:
```
$ npm run dev
> [email protected] dev
> npm run prep && vite
> [email protected] prep
> tsx scripts/setup-env.ts && npm run generate-icons
setup-env: see frontend/README.md#environment-variables for documentation
setup-env: .env is missing keys from config/.env.example:
VITE_GOOGLE_DRIVE_CLIENT_ID
VITE_GOOGLE_DRIVE_API_KEY
VITE_GOOGLE_DRIVE_APP_ID
VITE_PUBLIC_POSTHOG_KEY
VITE_PUBLIC_POSTHOG_HOST
Add them manually or delete your local file to re-copy from the example.
setup-env: the following VITE_ vars are set but not listed in any example file:
VITE_DEV_BYPASS_AUTH
Add them to config/.env.example or config/.env.desktop.example if they are required.
```
If you add a new `VITE_*` variable to the codebase, add it to the
appropriate `frontend/config/.env.example` file or the test will fail.
# Description of Changes
Adds the code for the SaaS frontend as proprietary code to the OSS repo.
This version of the code is adapted from 22/1/2026, which was the last
SaaS version based on the 'V2' design. This will move us closer to being
able to have the OSS products understand whether the user has a SaaS
account, and provide the correct UI in those cases.
# Summary
- Adds desktop file tracking: local paths are preserved and save buttons
now work as expcted (doing Save/Save As as appropriate)
- Adds logic to track whether files are 'dirty' (they've been modified
by some tool, and not saved to disk yet).
- Improves file state UX (dirty vs saved) and close warnings
- Web behaviour should be unaffected by these changes
## Indicators
Files now have indicators in desktop mode to tell you their state.
### File up-to-date with disk
<img width="318" height="393" alt="image"
src="https://github.com/user-attachments/assets/06325f9a-afd7-4c2f-8a5b-6d11e3093115"
/>
### File modified by a tool but not saved to disk yet
<img width="357" height="385" alt="image"
src="https://github.com/user-attachments/assets/1a7716d9-c6f7-4d13-be0d-c1de6493954b"
/>
### File not tracked on disk
<img width="312" height="379" alt="image"
src="https://github.com/user-attachments/assets/9cffe300-bd9a-4e19-97c7-9b98bebefacc"
/>
# Limitations
- It's a bit weird that we still have files stored in indexeddb in the
app, which are still loadable. We might want to change this behaviour in
the future
- Viewer's Save doesn't persist to disk. I've left that out here because
it'd need a lot of testing to make sure the logic's right with making
sure you can leave the Viewer with applying the changes to the PDF
_without_ saving to disk
- There's no current way to do Save As on a file that has already been
persisted to disk - it's only ever Save. Similarly, there's no way to
duplicate a file.
---------
Co-authored-by: James Brunton <[email protected]>
Co-authored-by: James Brunton <[email protected]>
# Description of Changes
This PR fixes false-positive TypeScript errors in our layered build
setup (core → proprietary → desktop) by ensuring each build’s typecheck
only evaluates files that are actually part of that build’s reachable
module graph. This prevents overridden core implementations from being
typechecked in higher-layer builds where they are effectively
unreachable due to alias-based overrides.
## Background
We maintain multiple build targets from a layered source tree:
- core: open source baseline
- proprietary: core + proprietary additions/overrides
- desktop: proprietary + desktop-specific additions/overrides
We implement overrides via paths/aliases such that placing a file in a
higher layer at the same relative path supersedes the lower-layer file
at runtime.
For safety, we run TypeScript typechecking independently per build
target to ensure all builds remain valid.
## Problem
Our existing tsconfig setup often typechecked files that are not
actually reachable in a given build. Specifically:
- When a file in core is overridden by a file in proprietary or desktop,
the overridden core file can still be included in the TypeScript Program
for the higher-layer build (typically due to broad include globs).
- This produces false-positive type errors in higher-layer typecheck
runs, even though those core files are effectively unreachable in the
build.
This created friction and noise, and meant we had to make unnecessary
changes to `core` to make the other builds happy, reducing type safety
in the process.
## Solution
This PR adjusts the tsconfig strategy so each build target's typecheck
is driven by reachable entrypoints rather than blanket inclusion of all
layer source trees. Concretely:
- Each build’s tsconfig now includes only:
- that build’s entrypoints and layer sources that are intended to be
compiled for the target
- any shared/top-level sources required by the target
- Lower layers (e.g., core) are not globally included in higher-layer
builds; they are instead pulled in through module resolution only when
actually referenced (with paths ordering ensuring the correct override
wins).
- This means that we still check all the files that will actually be run
with whatever the overridden logic is, but avoid wasting time and
introducing false-positives by not checking files which have been
overridden.
## Notes
Unfortunately, the config we use for the type checking can't be the same
as the one we use for Vite in this strategy. Vite needs to know about
the entire source tree, so it can't only include the subfolders because
it causes build errors. Because of this, I've duplicated the existing
(valid) tsconfig files and use them for Vite. This is a little clunky
but it does the job. Some day hopefully I'll come back to it and be able
to figure out a nicer way to do it, but for now at least, this solves
the type checking issues without impacting the runtime builds.
Also, I noticed that `@desktop` is defined as an alias, which was
presumably missed when I was removing the self-aliases from the files. I
don't see why you'd ever need to have a desktop file reference
`@desktop` to say "import this but make it impossible for something else
to override the import". I've removed the `@desktop` alias in this PR
while I was in there.
# Description of Changes
Changes the desktop app to allow connections to self-hosted servers on
first startup. This was quite involved and hit loads of CORS issues all
through the stack, but I think it's working now. This also changes the
bundled backend to spawn on an OS-decided port rather than always
spawning on `8080`, which means that the user can have other things
running on port `8080` now and the app will still work fine. There were
quite a few places that needed to be updated to decouple the app from
explicitly using `8080` and I was originally going to split those
changes out into another PR (#4939), but I couldn't get it working
independently in the time I had, so the diff here is just going to be
complex and contian two distinct changes - sorry 🙁
Main Issues Fixed:
1. Tools Disabled on Initial Login (Required Page Refresh)
Problem: After successful login, all PDF tools appeared grayed
out/disabled until the user refreshed the page.
Root Cause: Race condition where tools checked endpoint availability
before JWT was stored in localStorage.
Fix:
- Implemented optimistic defaults in useEndpointConfig - assumes
endpoints are enabled when no JWT exists
- Added JWT availability event system (jwt-available event) to notify
components when authentication is ready
- Tools now remain enabled during auth initialization instead of
defaulting to disabled
2. Session Lost on Page Refresh (Immediate Logout)
Problem: Users were immediately logged out when refreshing the page,
losing their authenticated session.
Root Causes:
- Spring Security form login was redirecting API calls to /login with
302 responses instead of returning JSON
- /api/v1/auth/me endpoint was incorrectly in the permitAll list
- JWT filter wasn't allowing /api/v1/config endpoints without
authentication
Fixes:
- Backend: Disabled form login in v2/JWT mode by adding && !v2Enabled
condition to form login configuration
- Backend: Removed /api/v1/auth/me from permitAll list - it now requires
authentication
- Backend: Added /api/v1/config to public endpoints in JWT filter
- Backend: Configured proper exception handling for API endpoints to
return JSON (401) instead of HTML redirects (302)
3. Multiple Duplicate API Calls
Problem: After login, /app-config was called 5+ times,
/endpoints-enabled and /me called multiple times, causing unnecessary
network traffic.
Root Cause: Multiple React components each had their own instance of
useAppConfig and useEndpointConfig hooks, each fetching data
independently.
Fix:
- Frontend: Created singleton AppConfigContext provider to ensure only
one global config fetch
- Frontend: Added global caching to useEndpointConfig with module-level
cache variables
- Frontend: Implemented fetch deduplication with fetchCount tracking and
globalFetchedSets
- Result: Reduced API calls from 5+ to 1-2 per endpoint (2 in dev due to
React StrictMode)
Additional Improvements:
CORS Configuration
- Added flexible CORS configuration matching SaaS pattern
- Explicitly allows localhost development ports (3000, 5173, 5174, etc.)
- No hardcoded URLs in application.properties
Security Handlers Integration
- Added IP-based account locking without dependency on form login
- Preserved audit logging with @Audited annotations
Key Code Changes:
Backend Files:
- SecurityConfiguration.java - Disabled form login for v2, added CORS
config
- JwtAuthenticationFilter.java - Added /api/v1/config to public
endpoints
- JwtAuthenticationEntryPoint.java - Returns JSON for API requests
Frontend Files:
- AppConfigContext.tsx - New singleton context for app configuration
- useEndpointConfig.ts - Added global caching and deduplication
- UseSession.tsx - Removed redundant config checking
- Various hooks - Updated to use context providers instead of direct
fetching
---------
Signed-off-by: dependabot[bot] <[email protected]>
Signed-off-by: stirlingbot[bot] <stirlingbot[bot]@users.noreply.github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Ludy <[email protected]>
Co-authored-by: EthanHealy01 <[email protected]>
Co-authored-by: Ethan <[email protected]>
Co-authored-by: Anthony Stirling <[email protected]>
Co-authored-by: stirlingbot[bot] <195170888+stirlingbot[bot]@users.noreply.github.com>
Co-authored-by: ConnorYoh <[email protected]>
Co-authored-by: Connor Yoh <[email protected]>
# Description of Changes
Please provide a summary of the changes, including:
## Add PDF File Association Support for Tauri App
### 🎯 **Features Added**
- PDF file association configuration in Tauri
- Command line argument detection for opened files
- Automatic file loading when app is launched via "Open with"
- Cross-platform support (Windows/macOS)
### 🔧 **Technical Changes**
- Added `fileAssociations` in `tauri.conf.json` for PDF files
- New `get_opened_file` Tauri command to detect file arguments
- `fileOpenService` with Tauri fs plugin integration
- `useOpenedFile` hook for React integration
- Improved backend health logging during startup (reduced noise)
### 🧪 **Testing**
See
* https://v2.tauri.app/start/prerequisites/
*
[DesktopApplicationDevelopmentGuide.md](DesktopApplicationDevelopmentGuide.md)
```bash
# Test file association during development:
cd frontend
npm install
cargo tauri dev --no-watch -- -- "path/to/file.pdf"
```
For production testing:
1. Build: npm run tauri build
2. Install the built app
3. Right-click PDF → "Open with" → Stirling-PDF
🚀 User Experience
- Users can now double-click PDF files to open them directly in
Stirling-PDF
- Files automatically load in the viewer when opened via file
association
- Seamless integration with OS file handling
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/DeveloperGuide.md#6-testing)
for more details.
---------
Co-authored-by: Connor Yoh <[email protected]>
Co-authored-by: James Brunton <[email protected]>
Co-authored-by: James Brunton <[email protected]>
This PR migrates the login features from V1 into V2.
---
- Login via username/password
- SSO login (Google & GitHub)
-- Fixed issue where users authenticating via SSO (OAuth2/SAML2) were
identified by configurable username attributes (email,
preferred_username, etc.), causing:
- Duplicate accounts when username attributes changed
- Authentication failures when claim/NameID configuration changed
- Data redundancy from same user having multiple accounts
- Added `sso_provider_id` column to store provider's unique identifier
(OIDC sub claim / SAML2 NameID)
- Added `sso_provider` column to store provider name (e.g., "google",
"github", "saml2")
- User.java:65-69
Backend Changes:
- Updated UserRepository with findBySsoProviderAndSsoProviderId() method
(UserRepository.java:25)
- Modified UserService.processSSOPostLogin() to implement lookup
priority:
a. Find by (`ssoProvider`, `ssoProviderId`) first
b. Fallback to username for backward compatibility
c. Automatically migrate existing users by adding provider IDs
(UserService.java:64-107)
- Updated saveUserCore() to accept and store SSO provider details
(UserService.java:506-566)
OAuth2 Integration:
- CustomOAuth2UserService: Extracts OIDC sub claim and registration ID
(CustomOAuth2UserService.java:49-59)
- CustomOAuth2AuthenticationSuccessHandler: Passes provider info to
processSSOPostLogin()
(CustomOAuth2AuthenticationSuccessHandler.java:95-108)
SAML2 Integration:
- CustomSaml2AuthenticationSuccessHandler: Extracts NameID from SAML2
assertion (CustomSaml2AuthenticationSuccessHandler.java:120-133)
---
- Configurable Rate Limiting
Changes:
- Added RateLimit configuration class to ApplicationProperties.Security
(ApplicationProperties.java:314-317)
- Made reset schedule configurable: security.rate-limit.reset-schedule
(default: "0 0 0 * * MON")
- Made max requests configurable: security.rate-limit.max-requests
(default: 1000)
- Updated RateLimitResetScheduler to use @Scheduled(cron =
"${security.rate-limit.reset-schedule:0 0 0 * * MON}")
(RateLimitResetScheduler.java:16)
- Updated SecurityConfiguration.rateLimitingFilter() to use configured
value (SecurityConfiguration.java:377)
---
- Enable access without security features
Backend:
- Added /api/v1/config to permitAll endpoints
(SecurityConfiguration.java:261)
- Config endpoint already returns enableLogin status
(ConfigController.java:60)
Frontend:
- AuthProvider now checks enableLogin before attempting JWT validation
(UseSession.tsx:98-112)
- If enableLogin=false, skips authentication entirely and sets
session=null
- Landing component bypasses auth check when enableLogin=false
(Landing.tsx:42-46)
- Added createAnonymousUser() and createAnonymousSession() utilities
(springAuthClient.ts:440-464)
Closes#3046
---
## Checklist
### General
- [x] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [x] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [x] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [x] I have performed a self-review of my own code
- [x] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [x] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
---------
Signed-off-by: dependabot[bot] <[email protected]>
Signed-off-by: stirlingbot[bot] <stirlingbot[bot]@users.noreply.github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Ludy <[email protected]>
Co-authored-by: EthanHealy01 <[email protected]>
Co-authored-by: Ethan <[email protected]>
Co-authored-by: Anthony Stirling <[email protected]>
Co-authored-by: stirlingbot[bot] <195170888+stirlingbot[bot]@users.noreply.github.com>
Reece BrowneandGitHub
